The Cuban Redneck DIY Channel Blog
Hello there, and thank you for visiting our blog! This blog (website) is meant to go side by side with our YouTube channel. Although we put considerable effort into the information we provide in our videos. However, every so often, a product, a service, or even the way we do things may change. Because YouTube doesn’t allow the editing of a video once published without losing all of your rankings, views, share, etc. we use this blog to keep the information we publish as accurately as possible. We are humans, so we don’t blame us for this if we fall behind a little! After all, this is a hobby, not a job. Life tends to throw a monkey wrench or two along the way every once in a while. With that said, know that I would greatly appreciate it if you brought any errors, misinformation, or suggestions to my attention via this page!
How to Build Cheap Shelves For Garage Storage
Welcome to the Cuban Redneck DIY website. As you may have already heard me say on several videos, there seems to be a lot of demand for my Redneck Cuban Recipes, so I have decided to have those videos and anything non DIY on Tuesdays and hardcore DIY stuff on [...]
Assembly & Modification of the Harbor Freight Foldable Workbench
Hello everyone, welcome back to the Cuban Redneck website. I hope everybody is doing well! Today I want to talk to you about the Harbor Freight folding clamping workbench. U.S. GENERAL makes this unit, and the current part number on the Harbor Freight website is 47844. Now, this unit, as [...]
DIY Router Base Plate with Adjustable Fence, Circles Cutting Jig, and Planer Capabilities
Hey, crew, how's everyone? Welcome to another installment here at the Cuban Redneck DIY channel. In this episode, we will be making a DIY router plate jig with an adjustable fence for cutting circles, dados, mortises, and more. I've been meaning to build a router plate jig like this for [...]
General International Table Saw
Hello, and welcome to another entry here at the Cuban Redneck website, I thank you all for subscribing, and you know what I always say? If you haven't already, why are you waiting? Today I want to talk to you about the General International 10 inch Table Saw model TS [...]
Circular Saw Crosscut Sled | Ryobi Cordless DIY Cut Jig
If you are looking to build a circular saw crosscut sled for either a corded or cordless circular saw, I hope I can offer some inspiration and ideas with this post! The circular saw crosscut sled is one of those woodworking shop tools that you either love or hate! I [...]
Lighting for Garage Shop
The Harbor Freight shop light as Lighting for a Garage Shop! When upgrading my garage shop lighting, I ran into many options ranging from about $15 on eBay and Walmart to north of $50 at places like Home Depot and Lowe’s. While cost was a huge deciding factor in purchasing [...]
Homemade DIY Stand for Benchtop Drill Press
If you have a Benchtop drill-press, you are more than likely going to need a drill press stand! I don’t know if it has to do with me being vertically challenged or what? But, I have never found, and over the counter, drill press stands for a benchtop model the [...]
Cool A Room Without AC
As I started to build my garage/woodworking workspace, I realized that the heat here in Southwest Florida would be an issue. The biggest problem is my breaker box or load center is at 90% capacity, and I only have a 15 AMP run to the garage! That means that the [...]
Helping Hands Tool
Do you own some "helping hands tools"? If you don't, you should! I am not sure where the name helping hands tool came from since these cool devices have been around for as long as I can remember, and I don't think they were always that! I think the first [...]
Harbor Freight Workbench
Thank you for visiting our new website. Today I want to talk to you about the four Harbor Freight Workbenches with light I purchase for my garage/woodworking workspace at our new Southwest Florida home. I want to start by saying that this is not my first garage workspace or woodshop. The [...]
My Garage Work Space and Woodworking Workshop
Hey, thank you for visiting my new website, my name is JC, aka the Cuban Redneck, and I appreciate you stopping by. As many of you know, we have recently purchased a property in Southwest Florida, Charlotte County, to be more exact! This will be our retirement home, and since [...]