The Cuban Redneck DIY Channel Blog
Hello there, and thank you for visiting our blog! This blog (website) is meant to go side by side with our YouTube channel. Although we put considerable effort into the information we provide in our videos. However, every so often, a product, a service, or even the way we do things may change. Because YouTube doesn’t allow the editing of a video once published without losing all of your rankings, views, share, etc. we use this blog to keep the information we publish as accurately as possible. We are humans, so we don’t blame us for this if we fall behind a little! After all, this is a hobby, not a job. Life tends to throw a monkey wrench or two along the way every once in a while. With that said, know that I would greatly appreciate it if you brought any errors, misinformation, or suggestions to my attention via this page!
Ford Maverick Trailer Hitch, The $22 & $29 Option!
Hello, and welcome to another Ford Maverick project. If you are new around here, this is the official blog for the Cuban Redneck DIY channel on YouTube. Please be aware that in the very near future, I plan to support other platforms, including ODYSEE.COM and RUMBLE.COM. My 2022 Ford Maverick is [...]
How to Automate Eco-Mode on the Ford Maverick
Hi, welcome back to the Cuban Redneck garage, where today I am going to share with you a simple device I have designed to fix something that has been bugging many 2022 Ford Maverick owners, including me. And although this mod, post, and video are focused on the Maverick, I [...]
Ford Maverick Strut Bar
Welcome to the Cuban Redneck Garage, where today, we are going to make a strut tower brace for the 2022 Ford Maverick. A strut tower brace, also known as a strut bar or strut brace, is a bracket used to reinforce the strut towers on a unibody chassis vehicle. Strut [...]
How Often Do You Need Oil Change?
Hello, and welcome back to the Cuban Redneck Garage, where today we will be talking about how often you need an oil change! I sincerely hope you are not one of the many who wait until the change oil light turns on in the dash to do an oil change! [...]
How often does Ford Maverick need an oil change?
Hello, and welcome back to the Cuban Redneck blog. Today we are going to discuss how often or when you should change the oil in your EcoBoost powered for Maverick. My 2022 Ford Maverick has only 2500 miles and about 100 hours of use on the odometer, so I was [...]
Cruise Control Ford Maverick XL
Hello, and welcome back to the Cuban Redneck DIY Channel Blog. I have to apologize for the slow flow of Ford Maverick content but getting part has been difficult. It seems that neither H&R nor Eibach are in a hurry to supply the demand of lowering springs for the number [...]
Maverick 2.0 EcoBoost Oil Separator Catch Can
Hello, I would like to welcome you to the first post on what will eventually be a dedicated series or playlist covering an array of modifications and upgrades to my 2022 Ford Markerick. There are many things I want to do to this truck, including improving performance, fuel economy, stance, [...]
DIY Speaker Building Jigs
Hi, and welcome back. As previously mentioned, I have been away for a bit but trust me when I say I am back, and I have a ton of content to share with you guys. That is especially true if you started following the Cuban Redneck DIY Channel on YouTube [...]
DIY Table Saw Zero Clearance Insert
Hello Cuban Redneck followers. Although the channel is approaching the 2500 subscribe mark, it feels like we just got this thing started last week. I say that because I have so many ideas and content to bring you that I have no idea what to do with myself! If only [...]
DIY Jigsaw to Scroll Saw Conversion
Hi, my name is JC, and this is the official blog of the Cuban Redneck DIY Channel. The objective of this blog is to serve not only as a source of additional information for the videos on YouTube but also as a reference for a lot of things that don't [...]
Adding Spindle Sander to the Harbor Freight Folding Workbench
Howdy, how are you all doing? I guess that by just looking at the preview, you know that we are back at the Cuban Redneck Garage, where today we are going to be adding an oscillating spindle sander to the Harbor Freight folding workbench. If you are considering getting an [...]
How to Increase Gas Mileage in Your Car, Truck, or SUV
Hello and welcome to the Cuban Redneck DIY Channel. If you found this post but haven't seen our channel, please check us out on YouTube! Today I want to talk to you about how to increase gas mileage in your car, truck, or SUV. The cost of gas is up [...]
DIY LED Light Fixture to Replace Fluorescent
Welcome to the official site of the Cuban Redneck DIY Channel, where we do cooking and grilling on Tuesdays and DIY projects on Friday! Call me crazy, but today's post is about DIY LED Light Fixtures. By reading the title, you probably ask yourself, you can't find anything that suits [...]